Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]

Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]

Status: In stock
SGD 492.80
Payment on delivery
Van chuyen don gianSimple shipping
San pham chat luong High quality products
Ban hang toan quoc Nationwide sales
Thanh toan khi nhan hang Simple shipping

Product details of Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]

Fluke Networks MT820060KIT  
IntelliTone Pro 200 Toner & Probe Kit  
Finds the cables the others cant  
IntelliTone digital signal processing rejects noise and false signals  
SmartTone analog signal precisely isolates individual wire pairs  
Tones safely and clearly on active networks  
Tests for continuity  
Identifies and diagnoses 10/100/1 Gb Ethernet link connectivity with NIC/hub
indication  
Verifies twistedpair installation with CableMap capability which identifies
common cable miswire

Get advanced vision for locating network cables more effectively at patch
panels, switches, termination blocks, or hidden within bundles. Our new
MT820060KIT IntelliTone Pro 200 LAN Toner and Probe Kit finds the cables
others can't. The MT820060KIT IntelliTone Pro 200 LAN Toner and Probe kit from
Fluke Networks is the first network cable toner and probe to offer digital and
analog signaling all in one tool. That means its equipped with the most
powerful cable location technologies for any work environment. Use digital
mode to trace and locate data cabling safely and effectively on active
networks. Use analog mode to isolate individual wire pairs, and trace voice,
audio, and video cabling.

The MT820060 KIT IntelliTone Pro 200 LAN Toner and Probe Series from Fluke
Networks gives you superior vision for locating cables hidden in floors,
ceilings, walls, and in bundles. This network cable toner and probe's
breakthrough digital technology makes it the first tool to tone and trace
safely and effectively on active networks.

Included Accessories  
  
LAN Toner  
200 Probe  
Coax F Connector Cables  
(2) RJ11 patch cables  
(2) RJ45 patch cable  
Test leads with alligator clips  
Lanyards  
Quick Start Guide  
(2) 9V Battery

Breakthrough digital and analog toning in one  
IntelliTone Pro is the first toner and probe to offer digital and analog
toning all in one tool. That  
means its equipped with the most powerful cable location and verification
technologies for any  
work environment  even active networks.  
Eliminates confusion over cable location; decisively rejects noise and false
signals  
Locates the correct cable bundle  
Isolates a cable within the bundle, despite cable bleed  
Verifies twistedpair installation with visual endtoend continuity test
(opens, shorts and  
reversed pairs)  
Identifies individual wire pairs with new SmartTone analog toning  
Simplifies signal interpretation in noisy environments with multiple LED
indicators  
Locate cables quickly and easily  
Fluke Networks has applied decades of cable test engineering expertise to the
science of  
locating copper cables. The result is what we call IntelliTone technology  a
digital signaltoning  
and signalinterpreting process that rapidly zeroes in on cables.  
IntelliTone technology energizes cable conductors with a smart, sychronized
digital signal.  
Multiple tone types occur in the signal that help you to:  
LOCATE the correct cable bundle using maximum radiation.  
ISOLATE a cable within the bundle using a signal with minimum radiation.  
VERIFY cable conductor continuity with an automated signal that steps through
each  
conductor.  
Locate hidden cables  
One of the toughest, most timeconsuming parts of locating a cable has been in
tracing its path  
amidst multiple cables and bundles in wiring closets. The IntelliTone digital
signal features a  
LOCATE tone that provides maximum radiation, allowing you to quickly locate
hidden and hardtofind  
cabling

Isolate the right cable or pair  fast  
Cabling installations have become increasingly complex, which has made cabling
increasingly difficult  
to locate with traditional technologies.  
When cables are run together for even short lengths, a signal from one can
bleed over to another. One cable might carry the original signal; other  
cables might carry the signal as a result of bleed. Isolating cables with
traditional tools requires guesswork, training, time for repeated testing 
and  
even the best efforts often result in mistakes.  
IntelliTone Pro provides two cuttingedge technologies to isolate cables or
wire pairs. Digital mode can be used to isolate twistedpair cables on a  
switch or within a bundle. SmartTone analog mode can be used to isolate wire
pairs at an unterminated outlet.

Overcome noise  and save hours of time  
Fluorescent lights, machinery, computer monitors and electrical wiring all
produce noise that slows down cable location. Together, the IntelliTone Pro  
Toners synchronized digital signal and the IntelliTone Pro Probes
microprocessor controlled signal identification technology reject noise and
false  
signals to clearly identify cable location. This can save you hours every week
on cable location projects.  
Tone on live networks safely and effectively  
Modern network devices use common mode termination for cables connected to
their ports. This reduces noise and crosstalk in the cable; but, it can  
also absorb a traditional toner signal. Unlike traditional signals, the
IntelliTone digital signal stays strong despite common mode termination. And
the  
IntelliTone Pro 200 LAN Toner automates toning individual cable conductors,
making it quick, efficient and safe to locate cables on active networks.  
Verify conductor continuity with cablemap  
Eliminate callbacks during cabling moves, adds and changes with the powerful
diagnostic capabilities of IntelliTone Pro 200 LAN. The IntelliTone  
Pro 200 Probe features a Cablemap capability that identifies common cable
miswires in twisted pair cabling. IntelliTone technology automates the  
testing of each conductor for endtoend continuity; LED lights and tones
clearly indicate miswires.  
Identify and troubleshoot cable services  
Service  Is the RJ45 jack a datacom jack, or a dead jack? IntelliTone Pro 200
LAN Toner LEDs clearly identify common datacom services found on  
todays networks including 10/100/Gigabit Ethernet links.  
Continuity  Once youve located a cable, the next step is to verify cable
conductor continuity. IntelliTone Pro 200 LAN Toners make it easy   
eliminating the need for a separate diagnostic tool.

200 LAN Toner  
1\. IntelliTone provides robust toning into active network equipment while  
eliminating cable misidentification due to bleed  
2\. Banana jacks allow you to use only the leads you need and facilitates easy  
replacement  
3\. One tool supports all VDV cable types (RJ45, RJ11, coax, and bare wire)  
4\. Test cable continuity, eliminating need for separate diagnostic tool  
5\. Precisely isolate wire pairs with builtin SmartTone analog toning  
6\. Tone active networks safely and effectively with IntelliTone digital mode  
7\. Identify resistance and if digital tone or analog tone function is
operational  
8\. Identify and diagnose Ethernet link connectivity with NIC/hub indication  
9\. Cable termination indicator identifies if cable is connected or not  
10\. Knob provides simple, task oriented operation

Features  
200 Probe  
1\. Multiplelevel LEDs simplify signal interpretation in noisy environments.
Visually steps through wiremap tests  
2\. SYNC indicates detection of IntellTone signal and shows battery status at
powerup  
Choose between two digital detection modes:  
3\. Digital detection mode: lets you locate cables at a distance  
4\. Digital detection mode: lets you isolate cables in bundles or at patch
panels  
5\. Analog mode used to isolate individual wire pairs with SmartTone  
6\. Test cable continuity  eliminating need for separate diagnostic tool  
7\. Timesaving thumbwheel lets you select desired toning mode on the probe
rather than toner  
8\. Plug works with CableMap function  eliminating the need for a separate
wiremap tool

Toner and Probe shared features:  
IntelliTone digital technology with advanced signal processing provides high
resolution measurement  
AutoOff feature: The toner turns off automatically after 2.5 hours of
inactivity. Probe turns off after 1 hour of inactivity  
SmartTone analog technology: IntelliTone Pro Toners generate four different
analog songs which alternate every time the pair under test  
is shorted; IntelliTone Pro Probes detect this tone or any other analog signal
from other testers  
Battery status: 3level battery status indicator LEDs on the toner and probe
light for one second at power on

Specifications General Operating temperature 32 F to 104 F (0 C to 40 C)
Storage temperature 4 F to +140 F (20 C to +60 C) Operating relative
humidity (% RH without condensation) 95% (50 F to 95 F; 10 C to 35 C) 75%
(95 F to 104 F; 35 C to 40 C) Uncontrolled < 50 F (< 10 C)
Vibration Random, 2 g, 5 Hz  500 Hz Shock 1 m drop test with and without
module Safety IEC 61010 Category: None Altitude 3000 m EMC EN 613261 Battery
type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media, including shielded (STP) and UTP cable; 75
or 50 Ohm coaxial cable; two conductor control, security, generic cabling. 10
BaseT or 10/100/1000 BaseT datacom networks. Toner Dimensions 5.54 in x 2.94
in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) Display LED Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP
cabling, F connector for coaxial cabling, Banana jack plugs (2)  two
conductor wiring Toner frequency IntelliTone signal: encoded digital signal
Analog SmartTone signal: 5001200Hz, 4 Songs Output power 5 V pp Auto power
down Turns off automatically after 2.5 hours of inactivity Probe Dimensions
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) 3 of 4 Display (8) LED
indicators, Synch LED indicator Audio IntelliTone: Microprocessor controlled
audio files, Analog: Detected toner signal Control Thumbwheel switch, volume
control wheel Tone detection Detects IntelliTone digital signal for Locate,
Isolate and CableMap Detects Analog SmartTone Signal (5001200Hz) and other
analog toners. Toner interface Main Mod8 port for cablemap on all four pairs
of UTP / STP cabling Auto power down Turns off automatically after one hour of
inactivity

Color : Yellow

Weight (KG): 1.000
 

Specifications of Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]

What's in the box:
  • 1 x Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]
General Features:
SKU OE702HLAB0W4L0SGAMZ-77817969
Model Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner & Probe Kit, SmartTone Analog Toning [MT-8200-60 KIT]
Warranty type No Warranty
Questions About This Product
Please Login or Register to ask question to the seller.
Login or Register to ask the seller now and answer will posted here.
My Questions
Questions and answers from HardwareCity Online Store
Answers from other sellers


Official delivery unit


Understanding the importance of safe and secure shopping, we provide our customers with a broad range of secure payment options including cash-on-delivery, where you pay in cash only when you receive your package. Be assured of product quality and authenticity: All purchases on Website are guaranteed to be genuine products, new, not defective or damaged. If it is, simply return it within 14 days for a full refund under our Buyer Protection Program.

Delivered by Singapore Post - Nationwide Sales - Payment Upon Delivery - Free Returns

Evaluate
Average rating
0
0 nhận xét
5 star
12 Very pleased
4 star
7 Satisfied
3 star
3 Normal
2 star
0 Below average
1 star
0 Disappointed

Tag:

Tag:
*

Back to top