Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]

Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]

Status: In stock
SGD 1568.00
Payment on delivery
Van chuyen don gianSimple shipping
San pham chat luong High quality products
Ban hang toan quoc Nationwide sales
Thanh toan khi nhan hang Simple shipping

Product details of Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]

Fluke 1587 FC  
2in1 Insulation Multimeter with Fluke Connect  
PI/DAR timed ratio tests  
Live circuit detection prevents insulation test if voltage > 30 V is
detected for added user protection  
VFD lowpass filter for accurate motor drive measurements  
Autodischarge of capacitive voltage for added user protection  
Insulation test 0.01 M to 2 G  
Insulation test voltages 1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V  
AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance, Continuity  
Capacitance, diode test, temperature, Min/Max, frequency (Hz)  
Auto power off to save battery power  
CAT III 1000 V, CAT IV 600 V measurement category  
Large display with backlight Rugged, utility hard case allows you to bring
everything you need for the job  
Threeyear standard warranty  
Click for larger image of the Fluke 1587 FC Insulation Multimeter  Insulation
Tester and DMM with Fluke Connect WirelessClick for larger image  
Fluke 1587 FC Shown  
Product Information  
The Fluke 1587FC HighPerformance 2in1 Insulation DMM combines a digital
insulation tester with a fullfeatured, truerms digital multimeter in a
single compact, handheld unit, which provides maximum versatility for both
troubleshooting and preventative maintenance.|Whether you work on motors,
generators, cables, or switch gear, the Fluke 1587 FC Insulation Multimeter is
ideally suited to help you with your tasks and at a cost that is far less than
buying the two products.

Included Accessories  
  
|

1  Remote Probe
1  Test lead set
1  Set of Alligator Clips
1  Ktype Thermocouple Probe
1  Hard Case
1  Quick Reference Guide
4  AA Alkaline Batteries
1  User's Manual

| Included  
  
The highperformance 2in1 insulation DMM

The Fluke 1587 FC Insulation Multimeters combine a digital insulation tester
with a fullfeatured, truerms digital multimeter in a single compact,
handheld unit, which provides maximum versatility for both troubleshooting and
preventative maintenance.

The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic
functions through the Fluke Connect Measurements app:

PI/DAR timed ratio tests with TrendIt graphs identifies moisture and contaminated insulation problems faster
Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
Historical tracking and trending of assets identifies degradation over time, allows realtime decisions to be made in the field with Fluke Connect Assets

Product highlights

PI/DAR timed ratio tests
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
VFD lowpass filter for accurate motor drive measurements
Autodischarge of capacitive voltage for added user protection
Insulation test (1587 FC: 0.01 M to 2 G)
Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V) for many applications
AC/DC voltage, DC millivolts, AC/DC milliamps, Resistance (), Continuity
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
Auto power off to save battery power
CAT III 1000 V, CAT IV 600 V measurement category
Large display with backlight
Rugged, utility hard case allows you to bring everything you need for the job
Included accessories: Remote probe, test leads and probes, alligator clips, Ktype thermocouple
Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient hands free operation
Threeyear standard warranty; extendable to fiveyears through product registration within 45 days of purchase

PI/DAR measurements with TrendIt graphs
Memory storage through Fluke Connect Measurements app
Temperature Compensation through Fluke Connect Measurements app
VFD lowpass filter for accurate motor drive measurements
Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
Insulation test: 0.01 M to 2.0 G
Autodischarge of capacitive voltage
Insulation test smoothing reading
Frequency
Capacitance
Diode test
Temperature
Min/Max
AC/DC Voltage
DC Millivolts
AC/DC Milliamps
Resistance (0.1  to 50 M)
Continuity
Threeyear warranty
Remote probe, test leads, alligator clips
Ktype thermocouple
Rugged, utility hard case
Auto power off

Electrical Specifications  
  
AC voltage measurement  
Range  
600.0 mV | Resolution | 0.1 mV  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 5000 Hz (% of Rdg + Counts) | (2% + 3)  
6.000 V | Resolution | 0.001 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 5000 Hz (% of Rdg + Counts) | (2% + 3)  
60.00 V | Resolution | 0.01 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 5000 Hz (% of Rdg + Counts) | (2% + 3)  
600.0 V | Resolution | 0.1 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 5000 Hz (% of Rdg + Counts) | (2% + 3)  
1000 V | Resolution | 1 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (2% + 3)  
Accuracy 60 Hz to 5000 Hz (% of Rdg + Counts) | (2% + 3)  
 1 kHz bandwidth  
LowPass Filter Voltage  
Range  
600.0 mV | Resolution | 0.1 mV  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 400 Hz (% of Rdg + Counts) | +(2% + 3), (6%  3)  
6.000 V | Resolution | 0.001 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 400 Hz (% of Rdg + Counts) | +(2% + 3), (6%  3)  
60.00 V | Resolution | 0.01 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 400 Hz (% of Rdg + Counts) | +(2% + 3), (6%  3)  
600.0 V | Resolution | 0.1 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (1% + 3)  
Accuracy 60 Hz to 400 Hz (% of Rdg + Counts) | +(2% + 3), (6%  3)  
1000 V | Resolution | 1 V  
Accuracy 50 Hz to 60 Hz (% of Rdg + Counts) | (2% + 3)  
Accuracy 60 Hz to 400 Hz (% of Rdg + Counts) | +(2% + 3), (6%  3)  
DC Voltage Measurement  
Range | Resolution | Accuracy (% of Rdg + Counts)  
6.000 V dc | 0.001 V | (0.09% + 2)  
60.00 V dc | 0.01 V | (0.09% + 2)  
600.0 V dc | 0.1 V | (0.09% + 2)  
1000 V dc | 1 V | (0.09% + 2)  
Input impedance  | 10 M (nominal), <100 pF  
Normal mode rejection ratio  | >60 dB @ 50 Hz or 60 Hz  
Common mode rejection ratio  | >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)  
Accuracies apply to  100% of range  
DC Millivolts Measurement  
Range | Resolution | Accuracy (% of Rdg + Counts)  
600.0 mVdc | 0.1 mV | (0.1% + 1)  
DC and AC Current Measurement  
AC 45 Hz to 1000 Hz  
Range | 400 mA  
Resolution | 0.1 mA  
Accuracy (% of Rdg+Counts) | (1.5% + 2)  
Burden voltage (Typical) | 2 mV/mA  
Range | 60 mA  
Resolution | 0.01 mA  
Accuracy (% of Rdg+Counts) | (1.5% + 2)  
Burden voltage (Typical) | 2 mV/mA  
DC  
Range | 400 mA  
Resolution | 0.1 mA  
Accuracy (% of Rdg+Counts) | (0.2% + 2)  
Burden voltage (Typical) | 2 mV/mA  
Range | 60 mA  
Resolution | 0.01 mA  
Accuracy (% of Rdg+Counts) | (0.2% + 2)  
Burden voltage (Typical) | 2 mV/mA  
Overload | 600 mA for 2 minutes maximum  
Fuse protection for mA input | 0.44 mA, 1000 V, IR 10 kA  
AC conversion | Inputs are accoupled and calibrated to the rms value of sine
wave input  
Conversions are truerms responding and specified from 5% to 100% of range.
Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to
crest factor 1.5 at 600 mA. For nonsinusoidal waveforms add +(2% reading +
2% FS) typical, for a crest factor up to 3.  
 1 kHz bandwidth  
Ohms Measurement  
Range | Resolution | Accuracy +(% of Rdg+Counts)  
600.0  | 0.1  | (0.9% + 2)  
6.000 k | 0.001 k | (0.9% + 2)  
60.00 k | 0.01 k | (0.9% + 2)  
600.0 k | 0.1 K | (0.9% + 2)  
6.000 M | 0.001 M | (0.9% + 2)  
50.0 M  | 0.01 M | (1.5% + 3)  
Overload protection  | 1000 V rms or dc  
Open circuit test voltage  | <8.0 V dc  
Short circuit current  | <1.1 mA  
 Accuracies apply from 0% to 100% of range  
 Up to 80% relative humidity  
Diode Test  
Diode test indication | Display voltage drop: 0.6 V at1.0 mA nominal test
current:  
Accuracy | (2% + 3)  
Continuity Test  
Continuity indication | Continuous audible tone for testresistance below 25 
and off above 100 . Maximum Reading; 1000   
Open circuit voltage | <8.0 V  
Short circuit current | 1.0 mA typical  
Overload protection | 1000 V rms  
Response time | >1 m sec  
Frequency Measurement  
Range | Resolution | Accuracy (% of Rdg+Counts)  
99.99 Hz  | 0.01 Hz  | (0.1% + 1)  
999.9 Hz  | 0.1 Hz  | (0.1% + 1)  
9.999 kHz  | 0.001 kHz  | (0.1% + 1)  
99.99 kHz  | 0.01 kHz  | (0.1% + 1)  
Frequency Counter Sensitivity  
600.0 mV ac  | V ac Sensitivity (RMS Sine Wave) 5 Hz to 20 kHz  | 100.0 mV  
V ac Sensitivity (RMS Sine Wave) 20 kHz to 100 kHz | 150.0 mV  
DC Trigger Levels to 20 kHz | NA  
6.0 V  | V ac Sensitivity (RMS Sine Wave) 5 Hz to 20 kHz  | 1.0 V  
V ac Sensitivity (RMS Sine Wave) 20 kHz to 100 kHz | 1.5 V  
DC Trigger Levels to 20 kHz | 400.0 mV and 2.5 V  
60.0 V  | V ac Sensitivity (RMS Sine Wave) 5 Hz to 20 kHz  | 10.0 V  
V ac Sensitivity (RMS Sine Wave) 20 kHz to 100 kHz | 36.0 V  
DC Trigger Levels to 20 kHz | 1.2 V and 4.0 V  
600.0 V  | V ac Sensitivity (RMS Sine Wave) 5 Hz to 20 kHz  | 100.0 V  
V ac Sensitivity (RMS Sine Wave) 20 kHz to 100 kHz |   
DC Trigger Levels to 20 kHz | 12.0 V and 40.0 V  
1000.0 V  | V ac Sensitivity (RMS Sine Wave) 5 Hz to 20 kHz  | 300.0 V  
V ac Sensitivity (RMS Sine Wave) 20 kHz to 100 kHz |   
DC Trigger Levels to 20 kHz | 12.0 V and 40.0 V  
 Maximum input for specified accuracy = 10x range (1000 V max). Noise at low
frequencies and amplitudes may affect accuracy  
 Usable to 100 kHz with full scale input  
Capacitance  
Range  | Resolution  | Accuracy (% of Rdg+Counts)  
1000 nF  | 1 nF | (1.2% + 2)  
10.00 F  | 0.01 F | (1.2% + 2)  
100.0 F  | 0.1 F | (1.2% 90 counts)  
9999 F  | 1 F | (1.2% 90 counts)  
Temperature Measurement  
Range  | Resolution  | Accuracy (% of Rdg+Counts)  
40  C to 537  C  | 0.1 C  | (1% + 10 counts)  
40  F to 998  F  | 0.1 F  | (1% + 18 counts)  
 Accuracies apply following 90 minutes settling time after a change in the
ambient temperature of the instrument  
Insulation Specifications  
Measurement range | 0.01 M to 2 G  
Test voltages | 50, 100, 250, 500, 1000 V  
Test voltage accuracy | +20%, 0%  
Shortcircuit test current | 1 mA nominal  
Auto discharge | Discharge time <0.5 second for C = 1 F or less  
Live circuit detection | Inhibit test if terminal voltage > 30 V prior to
initialization of test  
Maximum capacitive load | Operable with up to 1 F load  
Output Voltage  
50 V (0% to +20%) | Display range | 0.01 to 6.00 M  
Resolution | 0.01 M  
Test current | 1 mA @ 50 k  
Resistance accuracy (% of Rdg + Counts) | (3% + 5 counts)  
Display range | 6.0 to 50.0 M  
Resolution | 0.1 M  
Test current | 1 

mA @ 50 k Resistance accuracy (% of Rdg + Counts) | (3% + 5 counts) 100 V (0% to +20%) | Display range | 0.01 to 6.00 M Resolution | 0.01 M Test current | 1 mA @ 100 k Resistance accuracy (% of Rdg + Counts) | (3% + 5 counts) Display range | 6.0 to 60.0 M Resolution | 0.1 M Test current | 1 mA @ 100 k Resistance accuracy (% of Rdg + Counts) | (3% + 5 counts) Display range | 60 to 100 M Resolution | 1 M Test current | 1 mA @ 100 k Resistance accuracy (% of Rdg + Counts) | (3% + 5 counts) 250 V (0% to +20%) | Display range | 0.1 to 60.0 M Resolution | 0.1 M Test current | 1 mA @ 250 k Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) Display range | 60 to 250 M Resolution | 1 M Test current | 1 mA @ 250 k Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) 500 V (0% to +20%) | Display range | 0.1 to 60.0 M Resolution | 0.1 M Test current | 1 mA @ 500 k Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) Display range | 60 to 500 M Resolution | 1 M Test current | 1 mA @ 500 k Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) 1000 V (0% to +20%) | Display range | 0.1 to 60.0 M Resolution | 0.1 M Test current | 1 mA @ 1 M Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) Display range | 60 to 600 M Resolution | 1 M Test current | 1 mA @ 1 M Resistance accuracy (% of Rdg + Counts) | (1.5% + 5 counts) Display range | 0.6 to 2.0 G Resolution | 100 M Test current | 1 mA @ 1 M Resistance accuracy (% of Rdg + Counts) | (10% + 3 counts) General Specifications Maximum voltage applied to any terminal and common | 1000 V Storage temperature | 40 C to 60 C (40 F to 140 F) Operating temperature | 20 C to 55 C (4 F to 131 F) Temperature coefficient | 0.05 x (specified accuracy) per C for temperatures <18 C or >28 C (<64 F or >82 F) Relative humidity | Noncondensing 0% to 95% @ 10 C to 30 C (50 F to 86 F) 0% to 75% @ 30 C to 40 C (86 F to 104 F) 0% to 40% @ 40 C to 55 C (104 F to 131 F) Vibration | Random, 2 g, 5500 Hz per MILPRF28800F, Class 2 instrument Radio frequency communication | 2.4 GHz ISM Band Radio frequency certification | FCC: T68FBLE, IC: 6627AFBLE Electromagnetic Compatibility International | IEC 613261:Portable Electromagnetic Environment; IEC 6132622 CISPR 11: Group 1, Class A Group 1: Equipment has intentionally generated and/or uses conductively coupled radio frequency energy that is necessary for the internal function of the equipment itself. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a lowvoltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected. Korea (KCC) | Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. USA (FCC) | 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. Enclosure protection | IEC 60529: IP40 (nonoperating) Safety IEC 610101 | Pollution Degree 2 IEC 610102033 | CAT IV 600 V / CAT III 1000 V Batteries | Four AA batteries (NEDA 15A or IEC LR6) Battery life | Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 M with a duty cycle of 5 seconds on and 25 seconds off. Size (H x W x L) | 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in) Weight | 550 g (1.2 lb) Altitude | Operating | 2000 m Storage | 12,000 m Overrange capability | 110% of range except for capacitance which is 100% Frequency overload protection | <107 V Hz Fuse protection for mA input | 0.44A, 1000 V, IR 10 kA Includes: Remote probe Test leads Alligator clips Ktype thermocouple Hard case User documentation Color : Yellow Weight (KG): 0.550

Specifications of Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]

What's in the box:
  • 1 x Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]
General Features:
SKU OE702HLAB0W4JTSGAMZ-77817918
Model Fluke 1587 FC 2-in-1 Insulation Multimeter w/ Fluke Connect [1587FC]
Warranty type No Warranty
Questions About This Product
Please Login or Register to ask question to the seller.
Login or Register to ask the seller now and answer will posted here.
My Questions
Questions and answers from HardwareCity Online Store
Answers from other sellers


Official delivery unit


Understanding the importance of safe and secure shopping, we provide our customers with a broad range of secure payment options including cash-on-delivery, where you pay in cash only when you receive your package. Be assured of product quality and authenticity: All purchases on Website are guaranteed to be genuine products, new, not defective or damaged. If it is, simply return it within 14 days for a full refund under our Buyer Protection Program.

Delivered by Singapore Post - Nationwide Sales - Payment Upon Delivery - Free Returns

Evaluate
Average rating
0
0 nhận xét
5 star
29 Very pleased
4 star
14 Satisfied
3 star
5 Normal
2 star
0 Below average
1 star
0 Disappointed

Tag:

Tag:
*

Back to top